INDUCTION Heating Systems


Heating Treatment

CEIA generators perfectly adapt to hardening applications, surfacing hardening, annealing. The area and the heating depth depend in fact on the coil geometry and on the exposure time to the magnetic field.

The entirely solid state devices, diversify on the basis of the working frequencies in series 1800,900,200, 50; they show very high efficiency (greater than 90%), thanks to up-to date electronic technology and the use of advanced components, besides the easy adjustment to different dimension heating coils.

Thanks to an analogical input 0-10V and to a serial interface RS-232 on each model, it is possible to remote the control of power through PLC or CEIA control units like the Master Controller. The working temperature can be read and stabilized by using optical sensors series SH having a reading range from 75 to 2200°C.







Visit us at
Termoobrabotka
Moscow - Russian Federation
set 15 - 17, 2015
Exhibitor: JSC Modern Machine-Building Company

EMO
Rho - Milan - Italy
ott 5 - 10, 2015
Exhibitor: CEIA

Motek
Stuttgart - Germany
ott 5 - 8, 2015
Exhibitor: LTB

See all upcoming events >>

Preferred products

Superficial, localized heating in precise, limited areas.
Examples: tempering, heat treatments with differing degrees of hardness

Superficial heating of medium-sized mechanical parts.
Examples: tempering, heating for hot bending, heating for heating fit.

Fast heating with heat penetration to the heart of the object.
Examples: forging, heating for hot pressing and hot bending.